is your attic well-ventilated?

About Me

is your attic well-ventilated?

The ventilation in your attic has a direct impact on how cool and warm you can keep your home. If you don't have a well-ventilated attic, the attic temperatures will cause the temperatures inside your home to increase during the summer and cause moisture problems in the winter. How much ventilation does an attic really need? Your local HVAC technician can help you inspect and determine if your attic is adequately ventilated. My blog will show you the basics about attic ventilation to give you a good idea of what needs to happen to keep your home comfortable and protected from moisture.

Latest Posts

Tips for Maintaining Your Tankless Water Heater
15 September 2023

Over the years, tankless water heaters have gained

Navigating The World Of Air Conditioning Repairs: A Comprehensive Guide
17 August 2023

Summer heatwaves are no time for a faulty air cond

Should You Choose A Modulating Furnace For Your Home?
28 July 2023

If you're in need of a new furnace, you might be l

4 Key Things To Know Before Your First AC Replacement
11 July 2023

Air conditioners often last a decade or more, whic

Don't Get Hot Under The Collar: 4 Reasons To Get Your Air Conditioner Repaired
16 June 2023

If your air conditioner isn't keeping you cool thi

Removing An Old Furnace So You Can Install A New One

Preparing to have a furnace installed in your home can be tricky, but it can be made simpler if you remove any clutter or debris from the area beforehand. Additionally, you should ensure sufficient space for the furnace and technicians to work around it.

Make Enough Space

Furnaces are usually quite large appliances that require plenty of ventilation and clearance. Ensure there is enough room for the installation team to move around safely while working on your unit. Consider removing any decorations or personal items near where the furnace will go so as not to get damaged during installation.

Remove Any Existing Equipment

Another critical step is removing any old equipment that may be in the way, including old furnaces, water heaters, or any other large appliances, making it easier for technicians to install the new furnace and ensure it is safe and secure.

Removing a home heating furnace involves:

  • Turning off the power and gas supply to the furnace
  • Locating the access panel for the furnace, which is usually on the side or back of the unit
  • Removing the screws or other fasteners that hold the access panel in place
  • Removing the access panel and setting it aside
  • Disconnecting the electrical wires from the furnace by pulling them out of the terminals
  • Disconnecting the gas supply line from the furnace by loosening the fitting and pulling it out of the line

The technicians will locate the mounting brackets that hold the furnace in place. These brackets may be attached to the walls, floor, or ceiling of the area where the furnace is located. They will then remove the furnace from the mounting brackets by disconnecting the fasteners.

They will then carefully lift the furnace out of the area and place it on a tarp or other protective surface. Once the technicians have removed the furnace, they will replace the access panel and any other components removed during the process.

Have the Ductwork Installed

Next, the technician will install the ductwork and vents to ensure the furnace can properly distribute heat throughout the home. While this can be a complex process, with the help of a professional technician, you can have it done efficiently and effectively.

Overall, preparing for installing a furnace requires a bit of planning and preparation, but it is well worth the effort. You can enjoy a warm and comfortable home throughout the colder months with a new, efficient furnace. So, take the time to prepare your space and work with a trusted technician to ensure a successful installation. Reach out to a furnace installation service near you to learn more.