is your attic well-ventilated?

About Me

is your attic well-ventilated?

The ventilation in your attic has a direct impact on how cool and warm you can keep your home. If you don't have a well-ventilated attic, the attic temperatures will cause the temperatures inside your home to increase during the summer and cause moisture problems in the winter. How much ventilation does an attic really need? Your local HVAC technician can help you inspect and determine if your attic is adequately ventilated. My blog will show you the basics about attic ventilation to give you a good idea of what needs to happen to keep your home comfortable and protected from moisture.

Latest Posts

Four Signs Your Commercial Fridge Needs Repair
27 November 2023

If you own or operate a commercial fridge, it's cr

Five Signs You Need Heater Replacement Services
1 November 2023

It is essential to keep your heater in good condit

Residential AC Services: The Key to Comfort and Efficiency
13 October 2023

Residential air conditioning (AC) services play a

Tips for Maintaining Your Tankless Water Heater
15 September 2023

Over the years, tankless water heaters have gained

Navigating The World Of Air Conditioning Repairs: A Comprehensive Guide
17 August 2023

Summer heatwaves are no time for a faulty air cond

3 Easy Mistakes To Avoid When Installing A New HVAC System

Installing a new HVAC system is the key to keeping your home nice and cool. A new HVAC system can really help cool your house off and reduce your electrical bill. However, when choosing a new HVAC system, there are some classic mistakes you are going to want to avoid.

Mistake #1: Incorrect Furnace Size

One of the biggest mistakes you can make is choosing the wrong size furnace. Don't just go and pick out a furnace on your own. Hire a professional air conditioning installation service to perform the necessary calculations to figure out what size furnace you need.

Sit down and go over the calculations with the installation service to make sure all of the information they based the calculations on are correct. If you are not sure of the size of an area of your home, measure again.

It is worth it to get it right. Both an undersized and oversized furnace will hamper performance and cost you over time.

Mistake #2: Poor Air Design

The design of your air ducts is important, especially when installing a heating and cooling system in your home for the first time. Air distribution is key when it comes to avoiding hot and cold spots throughout your home.

You need an experienced technician who will use calculations to figure out where to place your air ducts. They should not just be randomly placed; they need to be strategically placed in order to really keep your home cool.

The duct system also needs to be correctly installed. If the duct system is not installed properly, leaks can ruin the efficiency of the system.

Mistake #3: Poor Drain System

Finally, you need to make sure that a nice drain system is set up for the furnace. Newer furnaces are designed to reduce the amount of wastewater that is created by the furnace. However, even higher energy efficient furnaces create wastewater, which needs to be properly drained away from the furnace. 

You need a drainage system set-up that will allow the water to drain to a drainage channel. The pipes need to be protected through to ensure they will not freeze and cause issues in the winter when you need to use the heating side of your HVAC system.

Proper drainage is also important to ensure high air quality. This can be combated by hiring a team that knows how to properly drain the furnace.

When you have a new HVAC system installed, you need to make sure the furnace is the right size, that the air duct system is well-designed to ensure your home heats and cools evenly, and make sure a proper drainage system is installed. For more information, contact a residential air conditioning installation service.